cd6-r_001'in resmi

Veri Merkezi NVMe™ Yoğun Okumalı SSD

KIOXIA CD6-R Serisi, büyük veri/IoT, çevrimiçi işlem işleme ve sanallaştırma dahil olmak üzere çok çeşitli ölçeklendirme ve bulut uygulamalarını desteklemek için optimize edilmiş, okuma açısından yoğun bir veri merkezi NVMe™ SSD'dir. PCIe® Gen4 x4 arayüzü ile oluşturulmuş CD6-R Serisi SSD'ler, 13-19 W aktif güç tüketimi ile 1M IOPS (rastgele okuma) ve 85K IOPS'ye (rastgele yazma) kadar tutarlı performans sunar.

KIOXIA Corporation'ın 96 katmanlı BiCS FLASH™ 3D TLC belleğine sahip olan CD6-R SSD'ler, 2,5 inç form faktöründe 15,36 TB'a kadar 1 DWPD (Günlük Sürücü Yazma) dayanıklılık ve depolama kapasitesi sunar. Bu sayede hiper ölçekli veri merkezi uygulamaları için çok uygundur.

Dosyalar

Temel Özellikler

  • PCIe® 4.0, NVMe™ 1.4 özellikleri uyumlu
  • Form Faktörü: 2.5-inç, 15mm Z-yüksekliği
  • Tescilli KIOXIA mimarisi: controller, firmware ve BiCS FLASH™ 96-layer 3D TLC
  • SFF-TA-1001 koruyucu (U.3)
  • Veri merkezi sınıfı iş yükleri için optimize edilmiş tek portlu tasarım
  • 6 nesil, iki kalıplı arıza kurtarma ve çift parite koruması
  • Zorlu 7x24 ortamlar için tutarlı performans ve güvenilirlik
  • Yüksek yoğunluklu depolama kurulumları için tasarlanmıştır
  • Güç kaybı koruması (PLP) ve end-to-end veri düzeltme
  • Veri güvenliği seçenekleri: SIE, SED, FIPS 140-2[1,2,3,4,5]
  • Altı güç modu ayarı

Temel Uygulamalar

  • Hiper Ölçek
  • IoT ve big data analizleri
  • Çevrimiçi işlem gerçekleştirme (OLTP)
    (işlemsel ve ilişkisel veritabanları)
  • Sanallaştırılmış ortamlar
  • Medya yayın ve içerik dağıtım ağları

Teknik Özellikler

* Table can be scrolled horizontally.

Base Model NumberKCD61LUL15T3KCD61LUL7T68KCD61LUL3T84KCD61LUL1T92KCD61LUL960G
SIE Model NumberKCD6XLUL15T3KCD6XLUL7T68KCD6XLUL3T84KCD6XLUL1T92KCD6XLUL960G
SED Model NumberKCD6DLUL15T3KCD6DLUL7T68KCD6DLUL3T84KCD6DLUL1T92KCD6DLUL960G
FIPS SED Model NumberKCD6FLUL15T3KCD6FLUL7T68KCD6FLUL3T84KCD6FLUL1T92KCD6FLUL960G
Capacity15,360 GB7,680 GB3,840 GB1,920 GB960 GB
Basic Specifications
Form Factor2.5-inch, 15mm thickness
lnterfacePCIe® 4.0, NVMe™ 1.4
Maximum Interface Speed64 GT/s (PCIe® Gen4 x4)
Flash Memory TypeBiCS FLASH™ TLC
Performance (Up to)
Sustained 128 KiB Sequential Read5,500 MB/s6,200 MB/s5,800 MB/s
Sustained 128 KiB Sequential Write4,000 MB/s2,350 MB/s1,150 MB/s1,300 MB/s
Sustained 4 KiB Random Read750K IOPS1,000K IOPS700K IOPS
Sustained 4 KiB Random Write30K IOPS85K IOPS60K IOPS30K IOPS
Power Requirements
Supply Voltage12 V ± 10 %, 3.3 V ± 15 %
Power Consumption (Active)19 W typ.15 W typ.13 W typ.
Power Consumption (Ready)5 W typ.
Reliability
MTTF2,500,000 hours
Warranty
DWPD1
Dimensions
Thickness15.0 mm +0 / -0.5 mm
Width69.85 mm ± 0.25 mm
Length100.45 mm Max
Weight130 g Max
Environmental
Temperature (Operating)0 ℃ to 70 ℃
Temperature (Non-operating)
Humidity (Operating)5 % to 95 % R.H.
Vibration (Operating)21.27 m/s2 { 2.17 Grms } ( 5 Hz to 800 Hz )
Shock (Operating)9.8 km/s2 { 1,000 G } ( 0.5 ms )
  • Product image may represent a design model.
  • Definition of capacity: KIOXIA Corporation defines a megabyte (MB) as 1,000,000 bytes, a gigabyte (GB) as 1,000,000,000 bytes and a terabyte (TB) as 1,000,000,000,000 bytes. A computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2^30 = 1,073,741,824 bytes and therefore shows less storage capacity. Available storage capacity (including examples of various media files) will vary based on file size, formatting, settings, software and operating system, and/or pre-installed software applications, or media content. Actual formatted capacity may vary.
  • GT/s: Giga Transfers per second.
  • A kibibyte (KiB) means 2^10, or 1,024 bytes.
  • MTTF (Mean Time to Failure) is not a guarantee or estimate of product life; it is a statistical value related to mean failure rates for a large number of products which may not accurately reflect actual operation. Actual operating life of the product may be different from the MTTF.
  • DWPD: Drive Writes Per Day. One full drive write per day means the drive can be written and re-written to full capacity once a day every day for the specified lifetime. Actual results may vary due to system configuration, usage and other factors.
  • Read and write speed may vary depending on various factors such as host devices, software (drivers, OS etc.), and read/write conditions.
  • IOPS: Input Output Per Second (or the number of I/O operations per second).
  • [1] Sanitize Instant Erase (SIE), Self-Encrypting Drive (SED) and FIPS (Federal Information Processing Standards) SED security optional models are available.
  • [2] SIE optional model supports Crypto Erase, which is a standardized feature defined by the technical committees (SCSI) of INCITS (the InterNational Committee for Information Technology Standards).
  • [3] SED optional model supports TCG Opal and Ruby SSCs. It has a few unsupported features of TCG Opal SSC. For more details, please make inquiries through “Contact us”.
  • [4] FIPS SED optional model utilizes a security module designed to comply with FIPS 140-2 and FIPS 140-3, which define security requirements for cryptographic module by NIST (National Institute of Standards and Technology). For the latest validation status, please make inquiries through “Contact us”.
  • [5] Security optional models are not available in all countries due to export and local regulations.
  • PCIe is a registered trademark of PCI-SIG.
  • NVMe is a registered or unregistered mark of NVM Express, Inc. in the United States and other countries.
  • Other company names, product names, and service names may be trademarks of third-party companies.

Support

Download

You can download past product information, white papers, and data sheets, etc.

Introducing technical glossary related to KIOXIA's products and technology including semiconductor memory and SSD.

Contact

Please contact us if you have any technical questions, requests for materials, are interested in samples or purchases of business products (Memory, SSD), etc.